Some mounting brackets secure the SSD from the underside, others from the edges. Replace the mount, if it’s a removable one. Place the drive in the mount with the holes aligned, then securely fasten the screws.
If you’ve misplaced yours, it’s easy enough to buy replacement screws online, as all SSDs have the same size holes. That’s right, you’ll need a crosshead screwdriver to both remove the mount and affix it to the SSD, before re-installing both to the case.įirst, locate the screws – these are very small, and will have come with the case. It’s a little easier, however, if you have removeable mounts available, as these will let you do the fiddly screwdriver work mostly outside of the case. Some cheaper cases also have mounting holes drilled directly into the chassis.Ī removable mounting bracket like this one makes installation easier. Large 3.5in drive bays usually have mounting holes for fitting a 2.5in drive as well, or there might be dedicated 2.5in mounts attached to the case’s interior chassis. Cable management will be easier if the drive is already in place, so start by locating one of your PC’s 2.5in mounts. The bigger but generally more affordable breed of SSD needs three things: a power cable, a SATA cable, and somewhere to sit inside your PC. The SATA power cable (left) and data cable (right) connect at the edge of your 2.5in drive.
This guide will show you how to set up both kinds of SSD, as well as the software-side setup you’ll need to perform if you’re adding a new SSD as your secondary or tertiary drive.
0 kommentar(er)
